Characteristics:
Support
The water quality tester has a holder on its right side to hold the test needle when not in use. This design is convenient for users to protect the needle and store it.
spring wire
The spring wire design can meet long distance needs when stretched. When not in use, the spring wire can be short and save space.
hanger design
There is a hole on the top of the water quality tester, which allows users to easily hang it on the wall.
Chlorine and PH test
The water quality tester can test water chlorine level and PH data. A machine can contain two types of tests.
Portable
The water quality tester is powered by 1.5v AA battery (not included) without power cable, which is convenient for users.
Use:
Chlorine test-set point:
Before use, please set the tester to test swimming pool water or hot spring water in the following order:
1. Test pool water or hot spring water with traditional Liquid Test tools;
2. Record the standby chlorine reading (1.5 PPM);
3. No adjustment is required for PH.
Look for the tester set point:
A. Place a 1.5V AA battery in the battery compartment of the grip (positive side up).
B. Hold the tester in one hand and the test stick in the other.
C. Insert the cleaned metal rod into the water in the black position.
D. Gently stir the water with a metal rod.
E. When the metal bar is held in the water, adjust the button on the front of the watch towards CL until it cannot move. Then slowly back to the right until the needle points to the tradition
The position of the liquid test tool result (eg 1.5).
F. Remove the test rod from the water, taking care not to move the knob. The pointer will slide to the right and a letter will stop between a and E. This letter is the adjustment point.
Note: The chart must be adjusted to the “Set Point” before each chlorine test.
Test pH:
The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8
a) Let the test stick stay in the water and turn the knob to pH to click (battery should be removed when reading pH).
B) wait for the needle to stop swinging and take a pH reading.
C) Gently dry the test rod, insert it into the slot next to the tester and store it.
The company has always been "high quality, high efficiency, new technology, new management" for this purpose. "Innovative development, quality first, customer first" is the business philosophy, providing customers with creative and innovative products. We emphasize team innovation, and every step of the development process is the result of teamwork, creativity, and computer application.
Chlorine content test:
The recommended chlorine content for swimming pool water or hot spring water is 1.2 to 1.7ppm
A) Set the pointer to the “Adjustment Point” position.
B) Hold the tester in one hand and the test stick in the other and insert the metal rod into the water in the black position. Wait for the pointer to stop swinging and take a reading.
C) leave the test stick in the water and continue to perform the pH test according to the instructions.
Note:
Keep the switch in the OFF position (to “PH”) when not in use.
Store in a cool, dry place away from direct sunlight.
Do not immerse the probe in any liquid other than pool or spa water.
Check battery freshness regularly - unit requires one 1.5 volt "AA" alkaline battery (not included).
Specification:
Type: water quality tester
Quantity: 1pc
Material: plastic + electric component
White colour
Battery: 1pcs AA 1.5v (not included)
Size: 18*11.6*3cm/7.70*4.56*1.18''(L*W*H)